Ritfit m3 pro vs major fitness f22: which smith machine fits your garage

Choosing between the RitFit M3 Pro and the Major Fitness F22 comes down to Smith machine versus power rack, and budget versus built-in weight stack. The RitFit M3 Pro starts at $3,419.99 and ships as a full Smith machine with cable crossover and a built-in 180 lb stack per side. The Major Fitness F22 starts at $929.99 and ships as a power rack with a barbell, plates, and a dual pulley system, with weight stacks sold as an add-on. This ritfit m3 pro vs major fitness f22 comparison lays out price, specs, footprint, features and warranty terms exactly as each maker lists them, so you can match the machine to your space and budget.

Quick verdict

If you want a guided-bar Smith machine with a self-contained weight stack and enough platform space for cable crossover work, the RitFit M3 Pro is built for that job. If your budget sits closer to $1,000 and you want a power rack that arrives with a barbell, plates, and dual pulleys ready to add attachments to, the Major Fitness F22 Standard covers more ground per dollar spent up front.

Neither machine is a like-for-like swap. The M3 Pro is a dedicated Smith machine and cable station; the F22 is a power rack with a cable pulley add-on. Readers comparing a Smith machine against a straight power rack more generally can also check the guide on smith machine vs power rack before deciding which category fits their training style.

Specs side by side

The table below pulls only the figures each maker lists on its product page.

Spec	RitFit M3 Pro	Major Fitness F22
Frame steel	A36 steel, 3 in x 3 in, 3 mm / 11-gauge	2 in x 3 in, 14-gauge
Rack height (with pull-up bar)	84 in (2,134 mm)	Not listed
Rack length (with Smith bar)	86.5 in (2,197 mm)	Not listed
Strength platform	21.5 sq ft	Not listed
Built-in weight stack	180 lb per side	Not built in; 170 lb add-on listed
Pull-up bar height from floor	83 in (2,108 mm)	Not listed
Pull-up bar capacity	300 lb dynamic / 550 lb static	Not listed
Upright adjustment holes	Listed as 1 in holes per side, exact count not given	14 upright holes, 17 pulley holes
Suggested user height	4’9 to 6’5 (145 to 195 cm)	Not listed

The F22 page does list a barbell spec as part of its included package: a 7.2 ft power bar rated for 1,500 lb with a 29 mm shaft. That bar ships with the Standard package price, while the M3 Pro sheet does not list an included barbell at its base price tier.

Price and value (our calculation)

RitFit’s M3 Pro starts at $3,419.99 for the Gator Black or Gator Pink frame with no add-on weight plates. Adding a 260 lb weight set brings the price to $4,199.99, and a 370 lb set brings it to $4,409.99, across both color options.

Major Fitness prices the F22 in two tiers. The Standard, in Tactical Black or Recon Desert, is $929.99 and includes the barbell and plate set described above. The Pro tier, in Tactical Black or Combat Red, is $1,999.99.

Dividing RitFit’s base price by its listed platform size gives $159.07 per square foot of strength platform (our calculation: $3,419.99 / 21.5 sq ft). No comparable square-footage figure is listed for the F22, so a direct per-square-foot comparison is not possible from our product research.

Looking at cost per pound of built-in resistance, the M3 Pro’s base price against its 180 lb per-side stack works out to $19.00 per pound of one-side stack capacity (our calculation: $3,419.99 / 180 lb). The F22’s weight stack is a separate add-on with no price listed on our product research, so the same math cannot be run for it. What is clear from listed prices alone: the F22 Standard costs roughly 27% of the M3 Pro’s base price (our calculation: $929.99 / $3,419.99), but it does not include a built-in weight stack at that price.

Build and capacity

RitFit builds the M3 Pro from A36 steel in a uniform 3 in by 3 in profile, 11-gauge (3 mm) front-to-back. The maker highlights this as a “uniform 3 x 3 frame, 11-gauge front-to-back” feature, meaning the gauge does not thin out on secondary frame sections. The pull-up bar is knurled carbon steel at 83 in from the floor, rated 300 lb dynamic and 550 lb static, sized for taller lifters up to 6’5 per RitFit’s suggested user height range.

Major Fitness builds the F22 from 2 in by 3 in, 14-gauge steel, a thinner gauge number than RitFit’s 11-gauge frame (lower gauge number means thicker steel). The F22 page lists two different capacity figures for its safety arms and J-hooks: one spot states “800 lbs reinforced safety arms capacity,” while another states “Safety Arms: 1200 lb” and “J-hooks: 1200 lb” static load. The page lists both figures, so treat 800 lb as the more conservative working number for the safety arms.

RitFit’s J-hooks use a sandwich-style design, combining carbon steel outer layers with a protective inner core, which the maker says improves bar feel and contact during racking. RitFit also lists longer 560 mm safety arms for extra catch space when training alone. Neither maker’s page gives a direct side-by-side capacity test, so these figures come only from what each company publishes.

Footprint and space

RitFit lists the M3 Pro’s rack height, including the pull-up bar, at 84 in (2,134 mm), and its rack length, including the Smith bar, at 86.5 in (2,197 mm). A separate width-style figure of 60.4 in (1,534 mm) also appears on our product research, alongside a 21.5 sq ft strength platform figure, giving a sense of the total training footprint a Smith machine cable crossover setup needs.

Major Fitness does not list exact height, length or width figures on the pulled page beyond noting a “Product Dimensions” section exists. Shoppers who need exact footprint numbers for the F22 should check that section directly on the maker’s page before ordering, since our product research used here does not carry those figures.

For garages or basements with tight ceiling height, the M3 Pro’s 84 in listed rack height is a useful reference point; measure your ceiling clearance against that number plus a few inches for the pull-up bar swing space. Readers weighing footprint against other rack styles can also check best freestanding squat stands for apartments for a lower-footprint alternative outside this Smith machine and power rack comparison.

Features and attachments

RitFit’s M3 Pro feature list centers on the Smith and cable combination: a twist-free cable system, a true 2.2 m Olympic Smith bar, three strength stations, and storage built into the frame itself. The balanced weight stack design uses a smaller top plate and four balance screws, which RitFit says helps the stack move evenly through the full range of a rep. Laser-cut upright numbering also appears on our product research, helping line up attachments without guesswork.

Major Fitness leans into included accessories at the Standard price point. The F22 Standard Complete Home Gym Package lists the 7.2 ft, 1,500 lb-rated power bar, the 8-plate change plate set (two each of 1.25, 2.5, 5 and 10 lb, steel core with rubber coating and a 2 in Olympic center hole), Sandwich J-Hooks, Safety Arms, and Dip Bars, all included at $929.99.

Beyond the base package, Major Fitness lists several extra attachments sold separately: upgraded aluminum pulleys, a weight stack set up to 170 lb, a multi-functional attachment for leg extensions, curls and lat pulldowns, and a 5-piece cable attachment set with bars and handles. The F22 page also mentions a 380 landmine and describes the rack as supporting 80+ exercises through its four training systems. RitFit’s sheet does not list a landmine attachment or a comparable multi-piece cable handle set at the base price. Shoppers comparing add-on options broadly can check best rack attachments or landmine attachment for what typically pairs with either rack style.

The F22’s dual independent pulley system runs at a 2:1 pulley ratio with 6 band pegs and a max load of 300 lb on each side of the pulley system. That figure matches RitFit’s per-side stack capacity of 180 lb only loosely, since RitFit’s number reflects its built-in stack weight while Major Fitness’s 300 lb figure reflects pulley load capacity rather than stack weight, so the two numbers are not directly comparable.

Warranty and return terms listed

Major Fitness lists a 35-day money back policy on the F22 product page. That is the only return or warranty-style figure present on our product research for either machine.

RitFit’s M3 Pro sheet does not list a warranty length, return window or shipping terms. Shoppers who need that information for the M3 Pro should check RitFit’s own policy pages directly, since none of those terms appear in the facts pulled for this comparison.

Choose RitFit M3 Pro if

Pick the M3 Pro when a built-in weight stack Smith machine is the priority over a free-weight power rack. It fits households with a wide range of user heights, since RitFit lists a suggested range of 4’9 to 6’5. It also suits anyone who wants frame-integrated storage and a dedicated 21.5 sq ft strength platform rather than adding a separate storage solution; see best barbell storage for standalone options if you go the power rack route instead.

Choose Major Fitness F22 if

Pick the F22 when your budget sits near $1,000 and you still want a barbell, plates and a dual pulley system included in that price. It also suits lifters who want a landmine attachment and a wide spread of exercise options (80+ per the maker) without paying for a built-in weight stack up front. The listed 35-day money back policy gives a stated return window that the RitFit sheet does not offer.

Other options we researched

Beyond this head-to-head, shoppers researching Smith machines and power racks more broadly can check the RitFit M1 Pro Smith machine review for a different tier in RitFit’s own lineup, or the Major Fitness F22 review for a closer look at that single rack. For a completely different rack brand comparison, see Bells of Steel Hydra vs REP PR-5000. Readers weighing a rack purchase against a full home gym machine can also start from best home gyms or best power racks for a wider set of listed options, and best home gym equipment for gear that pairs with either rack. This article is based on maker specs, prices and published information rather than hands-on testing; see how we research for that process.

Bottom line

The RitFit M3 Pro and Major Fitness F22 sit at different price points because they solve different problems. The M3 Pro, from $3,419.99, is a full Smith machine and cable crossover station with a built-in 180 lb stack per side and a 21.5 sq ft platform. The F22, from $929.99, is a power rack with an included barbell, plates and dual pulley system, built on 2 in by 3 in, 14-gauge steel, with a listed 35-day money back policy. Match the pick to whether you need a guided Smith bar with storage built in, or a lower-cost rack you can grow with attachments over time.